HD107S is very similar to the APA range and boasts everything APA102C brings, with a higher PWM rate and brighter LEDs. The control circuit and LEDs are integrated in a 5050 SMD package, which provides a small physical footprint for each pixel.
HD107S has the ability to digitally control the current of the connected LEDs. Use the 5-bit global current control to lower the brightness without sacrificing resolution. This global brightness control can be set when configuring your PixLite Mk3 controller.
|Global: 5 Bits|
|SMD5050 with integrated LEDs|
Output Pixel Voltage
|Up to 87fps|
Data Transfer Rate
Redundant Data Line
400 – 700 mcd
620 – 630 nm
1000 – 1500 mcd
515 – 530 nm
300 – 500 mcd
460 – 475 nm
Considerations for Use
- Presence of a clock allows for faster refresh rates
- High PWM rate allows for filming these pixels with cameras up to 87fps
- Only 8 bits of data for each color makes dimming curves less smooth
- Limited to 5V, causing short cable lengths
- No redundancy in data
Are you looking for HD107S pixel drivers that work with Art-Net or sACN?