Overview
This pixel protocol is adopted by many pixel manufacturers, and uses the standard differential DMX512 protocol to drive pixel chips.
Note: This protocol refers to a differential, dual wire, DMX512 pixel chip. There are DMX512 protocols that use a single line for data, which are also supported - see the protocol DMX512 for more information.
Connecting to a PixLite Pixel Controller
PixLite Mk3 pixel controllers can drive differential DMX512 pixels, as well as single-wire serial DMX512 pixels. Single wired DMX512 pixels can connect like a standard Data-Only protocol. Differential DMX512 pixels require connection of an additional data wire. This pinout is shown below.
DMX512-D pixel protocol
Specifications
PixLite Mk1 | |
PixLite Mk2 | |
PixLite Mk3 | |
Clock Type | Differential DMX (Dual Wire) |
Color Resolution | 8 Bits |
Current Control | |
RGB | |
RBGW | |
Data Transfer Rate | 100 - 2500kbps supported |
PixLite Support
Are you looking for DMX512 pixel drivers that work with Art-Net or sACN?
All PixLite Mk3 products support DMX512 as an available Pixel IC type, so get in touch with us to find out how the lighting specialists at Advatek can support you in your pixel lighting project.
PixLite® A4-S Mk3
Driving up to 24 universes of data, and offering easy mounting, sleek design and electrical fault protection — what’s not to love?
PixLite® E4-S Mk3
The E-series LED pixel controller is made for tighter budgets thanks to its ability to drive up to 24 universes of LED pixel control and route power directly to LEDs.
