PixLite 4 MkII Rugged Maximize

PixLite 4 MkII Rugged

This is a PixLite 4 MkII controller in a compact, rugged weatherproof enclosure with waterproof connectors for power, data and pixels.

Note: If using this controller with your own lights, you will need to purchase the mating IP68 female connector pigtails from here. If using your own power supply, you will need to purchase the mating IP68 female power connector pigtail from here.

More details



The PixLite 4 MkII Rugged controller supports input protocols via an ethernet connection and displays RGB color lighting on our range of pixel strings and pixel tape.

It supports the following protocols:

-sACN (E1.31)


It can handle up to 16 universes of Multicast/Unicast E1.31 or Art-net data and drives up to 680 pixels per output (Note: current limit is 7.5A per output).

Outputs to the following pixel types:

TLS3001, SM16716, LPD6803, WS2801, WS2811/12/12B/13/18, APA102/104, TM180x, MBI6020, INK1003, MY9231, MY9221, SK9822, SK6822 and more.

The controller also interfaces with our Advatek Assistant utility for easy configuration and uploading of new firmware.

This controller integrates seamlessly with our external Meanwell 12V 16A PSUs and our pixel strings or pixel tape for a fast and convenient pixel solution. Enclosure is screw-mountable and compact allowing easy installation in tight spaces - ideal for commercial and professional installations.

It features a high-impact ABS enclosure with 4 waterproof male panel connectors (for direct connection to our pixel strings and pixel tape), heavy duty 2 pin screw-up DC power connector (for direct connection to our 12V 16A Meanwell PSUs with strip only) and a screw-up waterproof RJ45 socket for ethernet connection. 

Requires either the HLG240-12 power supply with mating female connector:

Or the female connector to wire pigtail cable for other power connection:


No products

US$0.00 Shipping
US$0.00 Total

Cart Checkout