PixLite MKII Firmware

Filename PixLite-MkII-Changelog-V2.0.23.zip
Filesize 139 KB
Version 2.0.23 Previous versions
Date added August 29, 2019
Category Firmware

STOP!!! Ensure you ALWAYS download the latest version of Advatek Assistant to configure your new firmware with.

Note: The firmware hex file must FIRST be extracted from the main zip file before you can load it into the Assistant to perform an update.

Firmware upgrade file for the PixLite MkII controllers (second generation processors).

Note: This firmware cannot be used with any of the standard (1st generation) PixLite controllers.

Refer to User Manual for instructions before attempting to update.

PixLite MkII Firmware Changelog

V2.0.23
– Add WS2814 support

V2.0.22
– Add PixLite T8-S Mk2 support

V2.0.21
– Improve Jitter

V2.0.20
– Add Art-Net to DMX support
– Fix DMX output test mode when live sACN data also being streamed to the port

V2.0.19
– Add UCS8904 pixel driver support

V2.0.18
– Color fade test runs smoother (incremental frame by frame steps)

V2.0.17
– Add WS2815 pixel driver support
– Add GS8208 pixel driver support
– Add PixLite LR16 MkII support

V2.0.16
– Add 4 channel gamma correction
– Add MY9291 pixel driver support
– Add white channelin set color test mode for RGBW pixels
– Update to Advatek Protocol V6

V2.0.15
– Fixed incorrectly calculating the Art-Net broadcast address if 4th Subnet Mask byte not 0.
– Add support for PixLite 16 P&P MkII+

V2.0.14
– Add TM1814 support

V2.0.13
– Internal release. OEM changes.

V2.0.12
– Add UCS8903 support

V2.0.11
– Internal release. OEM changes.

V2.0.10
– Fix sACN/Art-Net timeout

V2.0.9
– Allow 0 pixels on an output
– Added support for UCS9812, WS2813, SK6822
– Self recovery functionality for immunity compliance testing
– Test mode controls DMX outputs

V2.0.8
– Internal release. OEM changes.

V2.0.7
– Add support for UCS2904
– Add support for PixLite 16 Plug & Play MkII
– PixLite MkII range now always firmware version 2.x.x

V1.0.6
– Added support for PixLite 4 MkII Rugged
– Enable bank 2 drivers without needing power connected to bank 2

V1.0.5
– Add support for PixLite 4 MkII ECO
– Add support for PixLite 16 MkII ECO

V1.0.4
– Add PixLite 4 MkII support

V1.0.3
– User adjustable clock speeds
– Art-net updated to version 4
– Added synchronous mode
– Added Art-Sync support
– Minor reduction in TLS3001 reset delay time
– DHCP timeout after 4 tries (approx 30 seconds)
– Test mode not activated when Factory IP held from bootup
– Added SK9822 support
– Added DMX512P support (250K and 650K baud rate options)
– Slow fan output PWM and enable 20% upwards dimming (instead of 30%)

V1.0.2
– Ethernet initialization after post boot connection
– Hold last frame bug fix
– Clock phases updated
– Long Range receivers (expanded mode) bug fix

V1.0.1
– Additional immunity for noisy power supplies
– Added hostname

V1.0.0
– Initial Release

..