We found other products you might like!
PixLite R4D-S
The PixLite R4D-S makes creating brilliant light shows in demanding settings a breeze. For professionals looking to make that ‘peace of mind’ purchase that makes installing and running complex displays easy, you can’t go past this long-distance pixel receiver device.
When used in tandem with the PixLite T8 Controller, the PixLite R4D-S can serve as the receiver of differential pixel data and convert it into a pixel ready signal. A long-distance capability is all you could need to open up a broad range of possibilities and make brilliant displays possible.
- Industrial grade fault protection
- Receive data up to 300+m from PixLite T8-S
- Power in and fuse good indicators
- Compact form factor
- Sleek design with flip lid access to all fuses
- Din-rail and wall mountable
4 Dedicated Pixel Outputs
4 individually fused outputs suitable for data only (3 wire) pixel LEDS, each with up to 510 RGB pixels. Requires any compatible PixLite T8-S transmitter unit to be configured in expanded mode.
Small Form Factor
Compact, lightweight, slimline unit designed for mounting in tight spaces.
Quick Connect Power
A high current clamp connector permits you to quickly and reliably connect power.
Fault Protection
The PixLite R4D-S Receiver features industrial strength fault protection on all inputs and pixel outputs. This makes this PixLite device far less prone to failure over time. Short circuit and ESD protection as well as protection against common DC voltage levels provides peace of mind for commercial and industrial installations.
Each output also includes a 7.5A mini blade fuse which will help protect the LEDs and power supply in a fault condition keeping the installation safe. A built-in spare fuse ensures there is always a quick replacement on hand.
What About Mounting Options?
The PixLite R4D-S Receiver can be securely placed using the mounting holes in each corner of the receiver device. Using all four mounting points, you’ll have a secure hold for that set-and-forget peace of mind you want in demanding professional lighting installations.
Alternatively use the Din-Rail Mounting Kit
-
Power
- Input Voltage: 5V-24V DC
- Per Output Current Limit: 7.5A (mini blade fuse)
-
Protection
- ESD: All inputs and outputs protected
- Data Input: +/- 24V DC fault protection
- Pixel Output Data Lines: +/- 24V DC fault protection
- Pixel Output Power Lines: Over current and short circuit protection
- Power Input: Reverse polarity protection
-
Physical
- Fused Pixel Outputs: 4
- Data Inputs (from PixLite Transmitter): 1
- Length: 95mm
- Width: 78mm
- Height: 33mm
- Weight: 0.2Kg
- Case: High Strength ABS - Black
- Ambient Operating Temperature: -20°C to +55°C
- Mounting: Directly mountable to wall or plate
- Accessories: Din-Rail mounting bracket optional extra
-
Data
- Data Only Pixel Outputs: 4
- Clocked Pixel Outputs: 0
- RGB Pixels/Output: 510
- RGBW Pixels/Output: 384
- sACN Universes: 12
- Art-net Universes: 12
Indicative Data Limits (set by transmitter):
-
Struggling to decide if your project needs a standard controller or a long range? Learn the difference between the two types of controllers and get hints on which one to use.
-
Power injection is one of the most commonly asked questions. Learn about what is, when to use it and how to do it properly.
-
Expanded mode allows greater flexibility with your pixel lighting and the ability to improve refresh rates when using data-only pixel types.
-
For more helpful information, click here to visit our Knowledge Base.
