The PixLite® Mk3 E-Series pixel controllers are easily the most cost-efficient commercial grade pixel controllers in the world.

Representing the pinnacle of over ten years of engineering experience, we have created a series of controllers that deliver on performance without breaking your budget.

The PixLite® E-series is an economical, but powerful series of pixel LED controllers built upon Advatek’s 3rd generation PixLite® Mk3 processor. Our ground-breaking Mk3 processor uses sophisticated 3rd generation firmware that provides the commands, logic and complex calculations to enable the device to drive the world’s most amazing lighting displays.
As the global semiconductor shortage continues to drive the price of pixel controllers up, our engineers have worked to offset these high costs with the innovative design of the E-series, which represents the best features of the A-series controllers at a price that will suit almost every installation budget.


See the benefits of the E-series controllers versus our more premium A-series controllers below:

Feature PixLite® E Series PixLite® A Series
PixLite® Mk3 Processor    
RGB Pixels per output 1020 1020
Extreme Refresh Rates (Same processing capability as A Series)  
Web-based Management Interface    
microSD card slot for Advatek SHOWTime™    
Pixels can be powered through PixLite®  
Smart Electronic Fusing  
Voltage and Current Monitoring  
Ethernet Speed 10/100 Mbit/s Gigabit
Number of Ethernet Ports 1 2
Universe Data Hardware Firewall  
Cost Approximately 20 - 30% less cost per output vs A-series  

PixLite® E4-S Mk3

The PixLite® E4-S Mk3 is an economical, but powerful pixel LED controller built upon Advatek’s 3rd generation PixLite® Mk3 processor.

The PixLite® E4-S Mk3 drives up to 6 universes of data on each of its 4 outputs for a total of 24 universes of LED pixel control. This mighty, budget-friendly pixel controller is suitable for installations where pixel power is not routed through the pixel controller.

This surprisingly compact controller also features a microSD card slot for record and playback with Advatek SHOWTime™ and can be configured using any web browser or Advatek Assistant 3 Software.

PixLite® E16-S Mk3

The PixLite® E16-S Mk3 is easily the most cost-efficient 16-output pixel controller in the world.

This economical but powerful pixel LED controller was built upon Advatek’s 3rd generation PixLite® Mk3 processor.

The PixLite® E16-S Mk3 drives up to 6 universes of data on each of its 16 outputs for a total of 96 universes of LED pixel control. This powerful, budget friendly pixel controller is suitable for installations where pixel power is not routed through the pixel controller.

This lightweight controller also features a microSD card slot for record and playback with Advatek SHOWTime™ and can be configured using any web browser or Advatek Assistant 3 Software.