Overview
This pixel protocol was designed by Macroblock in Taiwan. Scrambled-PWM technology enhances pulse width modulation by scrambling the “on” time into several “on” periods. This increases the effective PWM rate, allowing MBI6020 pixels to look good on almost every camera. The control circuit comes in a SOP16 package, allowing for more flexibility with LED choice.
MBI6020 graphic
Specifications
PixLite Mk1 | |
PixLite Mk2 | |
PixLite Mk3 | |
Clock Type | Clocked |
Color Resolution | 10 Bits |
Current Control | |
Physical Package | SOP16 |
RGB | |
RBGW | |
Input Voltage | 5V |
Output Pixel Voltage | 5 - 12V |
PWM Rate | 9766Hz |
Suitable Camera | Up to 326fps |
Data Transfer Rate | N/A |
Redundant Data Line |
Considerations for Use
Advantages
- Presence of a clock allows for faster refresh rates
- Very high PWM rate allows for filming these pixels with cameras up to 326fps
- Up to 12V, allowing for long cable lengths
- 10 bits of data for each color makes dimming curves more smooth
Disadvantages
- No redundancy in data
PixLite Support
Are you looking for MBI6020 pixel drivers that work with Art-Net or sACN?
All PixLite Mk1, Mk2, and Mk3 products support MBI6020 as an available Pixel IC type, so get in touch with us to find out how the lighting specialists at Advatek can support you in your pixel lighting project.
PixLite® A4-S Mk3
Driving up to 24 universes of data, and offering easy mounting, sleek design and electrical fault protection — what’s not to love?
PixLite® E4-S Mk3
The E-series LED pixel controller is made for tighter budgets thanks to its ability to drive up to 24 universes of LED pixel control and route power directly to LEDs.
