Pixel Protocol Overview: GS8202

This pixel protocol was designed by Genesis-Systech in China. The control circuit comes in a SOP8 package, allowing for more flexibility with LED choice.

PixLite Support

Are you looking for GS8202 pixel drivers that work with Art-Net or sACN? All PixLite Mk2 and Mk3 products support GS8202 as an available Pixel IC type, so get in touch with us to find out how the lighting specialists at Advatek can support you in your pixel lighting project.

Note: When configuring your PixLite device, select 'GS8208' as your Pixel Type. This is the equivalent protocol that will allow you to use GS8202 pixels.

Technical Specifications

Redundant Data Line

Clock Type Data-Only
Color Resolution 8 bits with 12-bit built-in gamma correction
Physical Package SOP8
RGB Yes
Output Pixel Voltage 5 – 24V
PWM Rate 8000Hz
Suitable Camera Up to 267fps, see Refresh Rate and PWM Rate
Data Transfer Rate 800kbps
Redundant Data Line Yes

GS8202 Advantages

  • Very high PWM rate allows for filming these pixels with cameras up to 267fps
  • Up to 24V, allowing for very long cable lengths
  • Redundant data line reduces chance of entire strip failure
  • 12-bit built-in gamma correction makes dimming curves more smooth

GS8202 Disadvantages

  • Data-only restricts refresh rates to be limited by the speed of the protocol, which will generally be slow

Operational Behavior

Unlike the start-up behavior of GS8206 and GS8208, these pixels won’t show a momentarily flash or test mode. GS8202 pixel lights will instead proceed to respond to their incoming data as soon as they are connected to power.

Categories: Pixel LEDs