We found other products you might like!
DCDC30 Pixel Strip
30 LEDs/m RGB 5m pixel strip with built-in DC/DC converter (removes any need for power injection), adhesive backing and molded Advatek plug.
Note: DCDC30-Black has been discontinued. The new and improved Blaze-30 Pixel Strip is now available, bringing extra features to your lighting design. Read more about these features, and some minor operational differences here.
- 12V - WS2812b (8 bit)
- Encased in a silicon tube - IP67 protection grade
- 5m from first pixel to the last with a 2m leader cable
- High quality adhesive backing
- Advatek IP68 screw connector intergrates with controllers and extension cables
US$89.95
DC/DC converter
Internal DC/DC converter that reduces the 12V input voltage down to 5V inside the strip itself, meaning no need for additional power injection.
Black or White PCB color
Available in either black or white to suit the specific background they are installed in, so as to minimize the impact of the strips when switched off.
-
Power
- Input Voltage: 12V DC
- Rated Power: 30W
-
Physical
- Leader Cable Length: 2m
- Connector: Advatek 4 pin Female Waterproof
- Backing: 3M Adhesive
- Wire Gauge: 18AWG
- Pixel Spacing (Pixel edge to Pixel edge): 29mm
- Length: 5m
- Width: 14mm
- Height: 5mm
- Color: Black
- Weight: 0.35 Kg
- Operating Temperature: -40°C to +80°C
-
Pixels
- Total Pixels: 150
- Pixel Type: WS2812b (8 bit RGB)
- Viewing Angle: 180 degrees
-
Other
- Protection Grade: IP67 (Silicon Tube)
- Cuttable: Yes
- Connect Multiple Sets in Series: No
- Lifespan: 50,000 Hours
- Warranty: 1 Year
-
Struggling to decide if your project should use 5V or 12V pixels? Read this article to find out more about the differences between them and which is right for your project.
-
Power injection is one of the most commonly asked questions. Learn about what is, when to use it and how to do it properly.
-
For more helpful information, click here to visit our Knowledge Base.
