30 LEDs/m RGB 5m pixel strip with every LED containing in-built 12V to 5V voltage regulator, allowing the strip to be cuttable at any length.
Each LED contains an internal voltage regulator that reduces 12v input down to 5v inside the LED, meaning no need for additonal power injection.
Strip is cuttable at any individual pixel, no need for back feeding power, making your installation a breeze.
In the event of a pixel failure this allows data to bypass a single failed pixel (other than the very first pixel) allowing the rest of the strip to continue operating.
Available in either black or white to suit the specific background they are installed in, so as to minimize the impact of the strips when switched off.
Struggling to decide if your project should use 5V or 12V pixels? Read this article to find out more about the differences between them and which is right for your project.
Power injection is one of the most commonly asked questions. Learn about what is, when to use it and how to do it properly.
For more helpful information, click here to visit our Knowledge Base.